https://files.inovelli.com/firmware/
Not sure what the “file link above” is, but if you’re looking for firmware, that’s where to go.
The direct link to v1.48 FW
https://files.inovelli.com/firmware/LZW31-SN/Beta/LZW31-SN_1.48.otz
Traversing the directory tree, it looks like the updated URL is https://files.inovelli.com/firmware/LZW31-SN/1.48/LZW31-SN_1.48.otz
Thanks, I have fixed the link.
Quick question: when pressing and holding it still seems there’s a delay. If the press delay is set to zero is there any way to remove any delay when holding / dimming? Thanks as always @EricM_Inovelli!
Hmmm, I believe there still needs to be a delay to determine if the user is just pressing the button vs. holding it. You can adjust the dimming speed to 1 or 2 to make the delay less noticeable.
Is that current delay configurable? I feel like I have everything set to the lowest delay.
As always appreciate your work on this!
There is a request to apply the same “scene enabled” delay to convert from push to held. It is not currently configurable from the 700ms like the scene delay is.
There is also a request to change the dim/ramp rates from seconds to ms. Then the switch could ramp/dim way faster (sub-second) vs. the current 1s fastest possible speed.
There is ALSO a request for dimming up vs. down at different rates, but I haven’t seen that grab much traction.
2 Likes
It definitely feels like you don’t need to specifically configure it if you’re already choosing to disable the functionality. I’d just have it default to as short as possible. ¯_(ツ)_/¯