Hubitat Bulbs LZW41 and LZW42 Drivers

bcopeland · January 12, 2020, 1:21am

@dgrekov fix pushed to github

bcopeland · January 13, 2020, 6:48pm

Sweet!!! They merged my fixes … You can go back to using the inovelli official drivers

bcopeland · January 13, 2020, 8:52pm

Pushed a fix for a reporting issue when switching from color to ct modes… Issued another pull request…

EricM_Inovelli · January 16, 2020, 11:32pm

@bcopeland We have merged that pull request as well.

Thanks for the work on these!

bcopeland · January 17, 2020, 12:16am

Anytime @EricM_Inovelli… I had fun doing it

bcopeland · January 25, 2020, 2:17am

I pushed an update to my GitHub on a couple of minor bug fixes… I also updated the command class versions to match the actual devices command class versions…

Unexpected side benefit … it seems to reduce chatter…

If no bugs reported I will create a pull request to merge into official

Daweeze · April 2, 2020, 3:33am

Hey @bcopeland…

Any chance we could get the special effects like the Aeotec written in the drivers?

lightEffects : {1=Christmas, 2=Fire, 3=Flash, 4=Police, 5=Random Colors Fast, 6=Random Colors Slow}

-Travis

bcopeland · April 2, 2020, 3:42am

There would have to be hardware support for the effects… Driver level effects would be too network intensive

bcopeland · April 9, 2020, 5:36pm

Just pushed a major update to the bulb drivers LZW-41/LZW-42:

major re-write for new coding standards / cleanup
stabilization of color temp and color reporting
re-organization of device data for standardization / addition of serialnumber, hardware ver, protocol ver, firmware
re-work of associations
fix of long-standing bug in lowest CT range

This update should also help alleviate delay issues when sending commands to many bulbs at once…

I recommend hitting configure on your devices after updating… But this is not required…

You can get them now from:

github.com

djdizzyd/Hubitat-Inovelli/blob/inovelli-new/Drivers/inovelli-bulb-multi-white-lzw41.src/inovelli-bulb-multi-white-lzw41.groovy

/**
 *  Copyright 2019 Inovelli / Eric Maycock
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 *  Inovelli Bulb Multi-White LZW41
 *
 *  Author: Eric Maycock
 *  Date: 2019-9-9
 *  updated by bcopeland 1/7/2020
 *		Added color pre-staging option
 *		Added power restored memory configuration
 *		Added debug logging configuration

This file has been truncated. show original

and:

github.com

djdizzyd/Hubitat-Inovelli/blob/inovelli-new/Drivers/inovelli-bulb-multi-color-lzw42.src/inovelli-bulb-multi-color-lzw42.groovy

/**
 *  Copyright 2019 Inovelli / Eric Maycock
 *
 *  Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 *  in compliance with the License. You may obtain a copy of the License at:
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software distributed under the License is distributed
 *  on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License
 *  for the specific language governing permissions and limitations under the License.
 *
 *  Inovelli Bulb Multi-Color LZW42
 *
 *  Author: Eric Maycock
 *  Date: 2019-9-9
 *  updated by bcopeland 1/7/2020
 *		Added color pre-staging option
 *		Added power restored memory configuration
 *		Added debug logging configuration

This file has been truncated. show original

I have issued a pull request to Inovelli’s official github:

Original thread on Hubitat community:

Tagging @EricM_Inovelli

EricM_Inovelli · April 9, 2020, 8:01pm

Awesome, thanks for doing that. Question, I see in your setColor and setColorTemperature methods that you are querying the bulb after changing its color. I believe the bulb automatically sends its color status after changing the color to the lifeline association group (group 1). So I think you are creating extra traffic with that and it can be left out. Otherwise, great job!

Edit: I may have been querying the colors in my original driver so that may be where you can that bit from. I think I changed it in the device handlers I sent to SmartThings for WWST certification.

bcopeland · April 9, 2020, 8:04pm

Annoyingly this doesn’t always work… The problems I have had with removing this totally is that if one of the values does not change it will not report …
Also since it is using switchColor CC V2 instead of V3 we don’t get targetValue … so if you are using a transition time it will get stuck in a middle value…
So what I did was schedule the query for after transition duration… Makes it so much more stable and predictable…

EricM_Inovelli · April 9, 2020, 8:05pm

Nice, Ok. That makes sense.

bcopeland · April 9, 2020, 8:06pm

and I really like the transition time… it’s not a jolt to the new color or colorTemp… it’s a nice smooth transition… but it made reporting almost useless.

npk22 · April 10, 2020, 12:21am

I like the new driver. The color transition works great. I did add a pull request to add back in the dimming speed for on and off commands.

@EricM_Inovelli Does the firmware support configuring a fade for on, off, and level changes?

bcopeland · April 10, 2020, 12:28am

Parameter Number	Parameter Size	Parameter Name	Values	Values Desc
2	1	Memory Function	0 (Default)	Remembers Last State
			1	Bulb turns ON after power outage
			2	Bulb turns OFF after power outage
51	2	Color Adjustment (Warm White)	1387 to 4999(Default)	Changes the Kelvin from 2700k (1387) to 4999k(4999)
52	2	Color Adjustment (Cool White)	5000 to 6500(Default)	Changes the Kelvin from 5000k (5000) to 6500k (6500)

https://products.z-wavealliance.org/products/3613

https://products.z-wavealliance.org/products/3614

npk22 · April 10, 2020, 12:41am

Thanks! That’s an awesome resource. I had no idea that existed.

bcopeland · April 10, 2020, 12:41am

Anytime… I always hit up the z-wave alliance page when writing z-wave drivers…

harjms · April 10, 2020, 1:52am

@bcopeland - So I’m still having an issue when I group the bulbs in hubitat with slow responsiveness after sending multiple commands. Sorry for the size. Here’s my best example:

Hubitat Group dimmer issue or bulb responsiveness? @EricM_Inovelli

bcopeland · April 10, 2020, 1:55am

Wow … Yea that’s not normal… Where is your hub in relation to this bulb?

bcopeland · April 10, 2020, 2:00am

Give you an example at my home I currently have:
20 LZW-41 Multi-White Bulbs
7 LZW-42 Multi-Color Bulb

And at sunrise and sunset I have rules that hit every bulb including from other brands… And sets color temperature… This is a ton of bulbs reacting at the same time…