Firmware v1.36 (Beta) | LZW36 | Fan + Light - Red Series

EricM_Inovelli · August 14, 2020, 8:44pm

We are releasing a beta firmware for the LZW36. See the link for bug fixes and enhancements. One notable addition:

Parameter 51 to disable the 700ms delay from when you press the physical on/off buttons. This is similar to what we released on the switch a bit ago.

You will need to update your Hubitat driver or SmartThings device handler to expose the new setting

This firmware should be stable, but if there are any issues, please let us know.

EricM_Inovelli · August 14, 2020, 8:44pm

Terk · August 19, 2020, 5:22pm

I updated my LZW36 via the modified Hubitat Z-Wave Firmware Updater to 1.36 and enabled the Disable Physical On/Off Delay, it now turns on/off much faster than I was able to get it by just changing the ramp rates to 0 before! Thanks for the update, I think my wife will appreciate it!

grahamk · August 19, 2020, 7:14pm

I wish i could use .gbl files with homeseer but i cannot. Any chance for a .hex?

EricM_Inovelli · August 19, 2020, 10:48pm

I asked our engineer some time ago and they were not able to convert the binary file to hex. I’ll ask again but you might want to check if Homeseer plans on supporting gbl files. I believe they are the standard going forward with Z-Wave 700.

jesse.sissom · August 20, 2020, 6:59pm

When I go to apply this update, this is what I get:

[2020-08-20 02:57:19.637 pm [error] java.lang.NullPointerException: Cannot invoke method and() on null object on line 461 (firmwareStore)

Can you tell me what I should do to resolve this error?

Terk · August 20, 2020, 9:36pm

@jesse.sissom what method are you trying to use to apply the update?

jesse.sissom · August 20, 2020, 10:35pm

The updater driver on hubitat local.

jvm33 · August 21, 2020, 2:33pm

I’m having the same update problem as @jessie.sissom.
This is on the latest Hubitat firmware (2.2.3.119).
In my case, I had the switch added with all of the security options off (i.e., I un-checked the S2 and S0 boxes when adding it).

Terk · August 21, 2020, 5:47pm

Sorry, I’m still on 2.2.2.129 because it is working great for me and Ive heard to many issues with not being able to boot after upgrading and my hub is a C-3 so I don’t have any experience with the C-7 hubs yet.

EricM_Inovelli · August 24, 2020, 6:18pm

@jvm33 @jesse.sissom I don’t think there is a problem with the update file as I’ve used it a couple times in Hubitat. Is it possible that you are not using the Binary version of the z-wave updater. There are two versions floating around now.

github.com

djdizzyd/hubitat/blob/master/Drivers/Z-Wave-Firmware-Updater/zwaveBinaryUpdater.groovy

// v1.00
import groovy.transform.Field

metadata {
    definition (name: "Z-Wave Firmware Updater",namespace: "djdizzyd", author: "Bryan Copeland") {
        attribute "currentFirmwareVersion", "string"
        attribute "firmwareUpdateProgress", "string"
        attribute "firmwareUploadPercent", "string"
        attribute "manufacturerId", "string"
        attribute "firmwareId", "string"
        attribute "firmwareTarget", "number"
        attribute "firmwareFragmentSize", "number"
        attribute "lockedBy", "string"

        command "clearLock"
        command "getVersionReport"
        command "abortProcess"
        command "updateFirmware", [[name:"binaryFirmwareUrl", type: "STRING", description:"Firmware URL"],[name:"firmwareTarget", type: "ENUM", description: "Firmware Target", constraints: ["0","1","2","3","4","5"]]]
    }
    preferences {

This file has been truncated. show original

Myztillx · August 27, 2020, 1:48am

I installed the this firmware on my device but cannot see the new parameters. I have excluded and included the device multiple times, but still no luck. I have confirmed that the application version is in fact 1.36. Any ideas? I am using Zwave2Mqtt.

harjms · August 27, 2020, 1:51am

Have the new drivers saved?

Myztillx · August 27, 2020, 1:52am

Sorry, I am unsure what you mean by this? Fairly new to Zwave devices.

harjms · August 27, 2020, 2:05am

I may be off…not a user of open zwave…whenever a new firmware comes out with new features, usually (for Hubitat/SmartThings etc…), we have to upgrade the drivers to support the new features. Open Z wave may be different, but here is the link to the latest 36.xml file.

github.com

InovelliUSA/OpenZWave/blob/master/config/inovelli/lzw36.xml

<Product Revision="9" xmlns="https://github.com/OpenZWave/open-zwave">
  <MetaData>
    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/031E:0001:000e</MetaDataItem>
    <MetaDataItem name="ProductPic">images/inovelli/lzw36.png</MetaDataItem>
    <MetaDataItem name="ProductPage">https://inovelli.com/red-series-fan-light-switch-z-wave/</MetaDataItem>
    <MetaDataItem name="ProductSupport">https://support.inovelli.com/portal/en/kb/inovelli/products/switches-fan-light-red-series-lzw36</MetaDataItem>
    <MetaDataItem id="0001" name="ZWProductPage" type="0001">https://products.z-wavealliance.org/products/3902</MetaDataItem>
    <MetaDataItem name="ExclusionDescription">To Exclude your switch, put your HUB in exclusion mode, hold the light up or down button and press the Light on/off button three (3) times.</MetaDataItem>
    <MetaDataItem id="0001" name="FrequencyName" type="000e">U.S. / Canada / Mexico</MetaDataItem>
    <MetaDataItem name="ProductManual">https://support.inovelli.com/portal/api/kbArticles/407409000002102001/attachments/kw8eq50c812f5d3344bc08295860b8b394c7c/content?portalId=edbsn8bb12d5f5a97d693e61ce4ce8a23f8b0e323eac44a6c2794f893e912acf005df&amp;inline=true</MetaDataItem>
    <MetaDataItem name="ResetDescription">You may factory reset the switch by holding down the light up or down button and the light on/off button for twenty (20) or more seconds. The LED Bar will turn Red and blink three (3) times to confirm.
    </MetaDataItem>
    <MetaDataItem name="Description">The Inovelli Red Series Fan/Light Switch is a 700 Series Z-Wave in-wall fan + light switch that controls both your fan motor and its attached LED, CFL, &amp; Incandescent bulbs which can be highly customized to your liking at the switch itself with our unique config buttons and advanced firmware. In addition, the Red Series comes with advanced features such as scene support, power monitoring, notifications, local protection, etc. This is the first of its kind that allows homes that only have one wire coming from the fan to the light switch and uses both a light switch and canopy module. Inspired and worked on by our wonderful community.</MetaDataItem>
    <MetaDataItem name="Name">LZW36 Fan/Light Dimmer</MetaDataItem>
    <MetaDataItem id="0001" name="Identifier" type="000e">LZW36</MetaDataItem>
    <MetaDataItem name="InclusionDescription">put your HUB in exclusion mode, hold the light up or down button and press the Light on/off button three (3) times.

Please Note: If this doesn't work, you can check to see if your switch is within Z-Wave Range by holding down the Light Button for 5-10 seconds (if it's not within range, the LED Bar will indicate Red and if it is within Range, the LED Bar will indicate Green). If your switch indicates Red, please move the switch closer to the HUB. If your switch indicates Green, please try running an Exclusion to reset your switch.
    </MetaDataItem>
    <ChangeLog>

This file has been truncated. show original

I’m not sure how you import or if you do. It may be automatic.

Myztillx · August 27, 2020, 2:17am

Looking through this .xml file, it does not seem to have the new configuration parameter (index=“51”). Am I missing something?

harjms · August 27, 2020, 2:19am

Let’s get the man with the plan @EricM_Inovelli - Driver update required for param 51 on Open Zwave platform?

EricM_Inovelli · August 27, 2020, 7:06pm

I have added it to our personal config file location but haven’t had a chance to test it yet. @Myztillx can you test it out and I will submit it to open-zwave as a PR?

https://github.com/InovelliUSA/OpenZWave/blob/master/config/inovelli/lzw36.xml

harjms · August 27, 2020, 7:08pm

Thanks @EricM_Inovelli! I know you’re a busy guy!

Myztillx · August 28, 2020, 1:26am

I’ll try and take a look this weekend when I have some time and get back to you!