Home Assistant and 2nd gen dimmer with S2 security --> discarding commands and status in HA wrong

Switches General Discussion
,
1

hi there, I’m looking for some help since I’ve noted that the status in HA is not getting updated correctly when I’m using the physical switch. I don’t know if that’s an issue with the z-wave JS driver implementation of something that’s actually wrong with the dimmer firmware.

Below is a snippet from the logs and it clearly is unhappy about something with security. I know I can get rid of the issue by dropping back to S0, but that just feels wrong.

If you can rule this out being a problem in the FW, I’ll happily take this to the zwaveJS folks. The switches are on the latest release FW (1.57 & 1.45).

Thanks for your help/insights,
Patrick

2023-08-09T05:58:04.490Z SERIAL « 0x01090004000c03260363bb                                            (11 bytes)
2023-08-09T05:58:04.498Z SERIAL » [ACK]                                                                   (0x06)
2023-08-09T05:58:04.504Z CNTRLR   [Node 012] command was received at a lower security level than expected - disc
                                  arding it...
2023-08-09T05:58:04.508Z DRIVER « [Node 012] [REQ] [ApplicationCommand]                              [discarded]
                                  └─[MultilevelSwitchCCReport]
                                      current value: 99
2023-08-09T05:58:04.601Z SERIAL « 0x010f0004000c096c0105055b031e800258                                (17 bytes)
2023-08-09T05:58:04.608Z SERIAL » [ACK]                                                                   (0x06)
2023-08-09T05:58:04.614Z CNTRLR   [Node 012] command was received at a lower security level than expected - disc
                                  arding it...
2023-08-09T05:58:04.619Z DRIVER « [Node 012] [REQ] [ApplicationCommand]                              [discarded]
                                  └─[SupervisionCCGet]
                                    │ session id:      5
                                    │ request updates: false
                                    └─[CentralSceneCCNotification]
                                        sequence number: 30
                                        key attribute:   KeyPressed
                                        scene number:    2
2

Replying to myself, “solved” the problem by replacing the old Nortek z-wave/zigbee controller with a new Zooz ZST39 800 for z-wave and all is well. So not a switch problem, nor a zwave js problem - oh well…

2 Likes