Not related to the OPs issue… But what is the latest version of the firmware for the LZW30-SN.
I bought a std red series switch, added the device handler (I have around 10 of the gen 2 red series dimmers). As a side note, when I added it to Smartthings, it showed up as a thing, not a generic switch, and never asked for the qr code. I had to do a factory reset, then added it, then added the device handler, and set the handler for the switch through the IDE. Also one of the plastic screw retainer tabs was missing on the screw for attaching to the junction/plug box. So either there is a quality control issue, or this was a used unit that was resealed and sold (I bought it through Amazon)
None of the above is really an issue for me, it is working, but what struck me as odd, is the firmware version… From the Device settings in the Samsung IDE. Note the version states 1.20 … latest on the web site is a beta 1.19 … Not sure whats going on here…
Hey @ljvb – I split this from the other thread as it was a Hubitat thread and I didn’t want people to get confused.
Yeah that is weird… can you tell me what the date code is on these and/or when you purchased them from Amazon? It should’ve picked up the handler, but I’ve seen it rarely when it doesn’t do that.
Interesting – well Amazon does do a crappy job of understanding what is used and what isn’t… we’re trying to get it so that they just send all returns back to us, but to my knowledge there isn’t a way.
Do you remember if you broke the plastic seal on the box when you opened it?
Ok, yeah this is strange. Depending on when you purchased this and/or the date code, it should either say: 1.16 or 1.19. I’m not sure why it’s saying that in IDE
I made the purchase on Saturday Sep 4th.
This is the link to the purchase
The seal was intact. I am somewhat familiar with tamper evident seals (there are competitions at Blackhat messing with them… it’s fun). It was identical to the seals on the Fan/Light switch I purchased (on Amazon) and the last 2 Red series dimmers (purchased through the Inovelli store directly) within the last month. Which is why I feel it is more likely a quality control issue versus a return… I compared the seal stickers on the amazon sold items to the ones purchased through you guys. The sticker seals are identical as far as I can tell. The one thing I guess I should mention, is that you can carefully remove the stickers without tearing the packaging.
Not sure where to find the date code…I did attach the sticker on the box… oddly, none of the other switches I have purchased had this sticker as far as I can remember.
I do have an Aeotec zwave stick… I can throw on a VM (all my machines are Macs, not a VM on the Mac, I have had issues with the software USB passthrough that Fusion uses, rather on an actual Vsphere cluster where I can use VMDirectpath to pass the USB through directly to.a windows VM) and poke around directly to see if it is just the IDE that is reporting incorrectly. But it won’t be till the weekend as a certain child is utilizing my laptop for school, he has his own on order getting here later this week.
Have you guys had any issues with counterfeiting… Amazon has a number of issues relating to counterfeiting… It’s a stretch… but something to keep in mind (maybe I am paranoid because I am an IT Security specialist)
Yeah, this is strange. We’re checking with the engineer tonight. Quite possibly they just named 1.19 to 1.20 for certification, but that seems strange that they didn’t tell us.
I’m also wondering who put that barcode over the top of the logo on the box. Is that how it came to you? I’m guessing so because that’s an Amazon barcode. However, we print our own on the back of the box. Just makes me curious why they did that.
We haven’t had any issues with counterfeiting, so I’m not as concerned there. We did have a large scale fraud operation against us where a ring of people used stolen credit cards to purchase our Black Series switches (Secret Service is involved) but nothing with the Red Series. I’m creating a separate post about that shortly.
I can tell this is new packaging (red dot over the “i” – whereas our old packaging it was black), however, so I doubt this was a used item as those shipments just arrived. I will address the QC issue with the team around the plastic screw holder missing.
Date code is located on the front of the switch at the top left (should be a series of four numbers – my guess would be 0820 or 0920).
Thanks for bringing this up – we have a call with the manufacturer tonight and I’ll shoot them a PM as well to see.
I also ordered some LZW30-SN’s from Amazon that have 1.20 firmware (ordered 9/6, received 9/9, installed 9/12). Same barcode label on my boxes as well. Were you able to find anything in regard to 1.19 vs 1.20?
Basically it was a bug that allowed the factory to determine whether a devices Z-Wave IC is good or not good during testing. So, not a consumer facing bug.
Thanks for getting back to us. It really is the difference between other manufacturers (especially massive ones like GE and Leviton who I don’t think I have ever received a response for, for anything, none smarthome related inquiries) and yourselves.
Is this screenshot from a document that is customer-facing? I’d LOVE to get my hands on firmware change logs to understand what is going on.
For example, that specific screenshot tells me how I can have the switch go to “white” from WebCore wheras when I do setColor to White in WebCore it goes to Red.
I agree. Release Notes like this are helpful. The only thing to add for Inovelli is to note “Not Released” for the ones that never hit the public streets.
@EricM_Inovelli – when you get a chance, can you update the KB articles with the change-logs?
Agree – no, this was an internal document from the manufacturer. We had no clue they updated to 1.20 which was appalling. When we asked, this is what they sent us.
What do you mean by this? Like, “here’s what we were working on, but we didn’t release it?”
I think he means if there was a release that didn’t pass Beta, or was skipped, then maybe say Firmware 1.19.1 - Skipped, New Firmware 1.20…maybe so that the average person doesn’t assume they’re missing a firmware? Possibly?
Yeah. Many companies have firmware that was never released…as in Public Release are are internal only. Though they still often have fixes that are important but do not affect large numbers of users or had a short shelf life in testing etc before another release. All the notes are important though for all releases, my point was just to list them all and to avoid questions as to why nobody was informed or cannot find files or info on a previous release, just mark it as not released in some way. Dunno haha. Just my opinion in the way I like to receive release notes for the software and firmware stuff I deal with every day at work.
@kreene1987@Eric_Inovelli The release notes are always in the KB article for the firmware version. For example, the KB article for firmware 1.19 mentions the addition of parameter 51 and the change to parameter 5 that makes the LED white.
LOL! Sneaky sneaky! I just noticed the 1.20 that came on my new switches and had a “wait… I don’t remember that one” moment. Then found 1.21 when I looked at the firmware files as well. We need a change log!
Now to add another wrench to the works… the same switches that were reporting 1.20 under smartthings are reporting 1.47 under Hubitat. I just switched over the other day, so I am still learning Hubitat.
