LZW45 with LZW31 dimming

Lighting General Discussion
1

I have few questions regarding LED Strip

  1. Can I use Red Dimmer LZW31 to dim LED Strip?
  2. Can I use my own 5 pin wire from controller to LED strip, I already have wiring installed behind kitchen cabinet.
  3. I assume I can but will ask anyway can I solder strips together to create corners since these are no longer available?
  4. Can strip be cut to length?

I have outlets on top shelf of kitchen cabinets for the controller, I have 5 pin flat ribbon wire going from top shelf to the bottom of the cabinet behind cabinet. These outlets are controlled by LZW31.
I want to know if I can hook up inovelli led strip and control it using LZW31 including dimming.

Thank you for all help.

2
  1. You can dim the led strip with the dimmer via associations
  2. I doubt it but maybe @Eric_Inovelli knows
  3. You might be able to use the ‘T’ adapters. The strips are fairly flexible and put a sight twist and bend into mine. No adapter needed.
  4. Strips cannot be cut. They come in 6 inch and 12 inch lengths and snap together. No soldering.
3

This is a great question – @EricM_Inovelli – do you know the answer to it? I’m thinking it should be ok.

1 Like
4

Should be able as long as it’s wired straight thru and appropriate gauge wire.

1 Like
5

Thank you to everyone for help. I got excited and was ready to order 2 sets but I just noticed that all pictures show 6 pins on wiring and end caps. As I have 5 pin wire installed I don’t think it will work for my application.