I have a scene set up to turn off all of the lights on my Inovelli red dimmers. While I’ve set the trigger devices to be all of the dimmers, only one will actually control the scene and sometimes it can even be a bit laggy. Only the trigger on the Kitchen Table is reliable - the other triggers rarely get the scene to trigger? I’m new to hubitat and scenes - so not sure where to go from here.
The same issue is happening for turning the scene on, which is set up similarly.
Do all of your devices have the same driver? Are they setup using the built-in driver (System → Inovelli Z-Wave Smart Scene Dimmer S2) or the community one developed by Inovelli (User → Inovelli Dimmer Red Series LZW31-SN)?
Have you tried setting up the rule for each device vs. one rule with multiple devices? Might test your theory of kitchen responds faster compared to the rest.
So the two three way switches with scenes not working are both set up as in the picture below, with the GE add-on switch being in the box with the line and the red dimmer in the box with the load.
You may just need to go into each device and set the parameter 52 from 1 to 2 and then back to 1 again. (or whichever parameter allowed people to disable scenes).
