VZW31-SN Aux Switch Scene states

Switches Firmware Discussion
1

I have a brand new VZW31-SN which I have connected to a White Series aux switch. Enabling the Aux Switch Scene mode, I am seeing the distinct Central Scene 004-006 events from the aux switch working great! :grinning: :grinning: :grinning:

One small enhancement I wanted to request: I see the Central Scene values come through, but my zwave-js/home-assistant events aren’t being mapped to the typical event states: CentralSceneKeys. Instead, I only see the raw values 0, 3, 4 etc. It is easy enough to reverse engineer these, but it breaks some of my Home Assistant automations.

Looking at the device’s debug info in zwave-js, I see the main Scene 001-003 from the main switch have value to state mappings, e.g.:

 {
      "id": "11-91-0-scene-002",
      "nodeId": 11,
      "toUpdate": false,
      "commandClass": 91,
      "commandClassName": "Central Scene",
      "endpoint": 0,
      "property": "scene",
      "propertyName": "scene",
      "propertyKey": "002",
      "propertyKeyName": "002",
      "type": "number",
      "readable": true,
      "writeable": false,
      "label": "Scene 002",
      "stateless": false,
      "commandClassVersion": 3,
      "min": 0,
      "max": 255,
      "list": true,
      "states": [
        {
          "text": "KeyPressed",
          "value": 0
        },
        {
          "text": "KeyReleased",
          "value": 1
        },
        {
          "text": "KeyHeldDown",
          "value": 2
        },
        {
          "text": "KeyPressed2x",
          "value": 3
        },
        {
          "text": "KeyPressed3x",
          "value": 4
        },
        {
          "text": "KeyPressed4x",
          "value": 5
        },
        {
          "text": "KeyPressed5x",
          "value": 6
        }
      ]
    },

However, when I look at Scene 004-006 for the Aux Switch Scenes, the states aren’t there, e.g.:

    {
      "id": "11-91-0-scene-005",
      "nodeId": 11,
      "toUpdate": false,
      "commandClass": 91,
      "commandClassName": "Central Scene",
      "endpoint": 0,
      "property": "scene",
      "propertyName": "scene",
      "propertyKey": "005",
      "propertyKeyName": "005",
      "type": "number",
      "readable": true,
      "writeable": false,
      "label": "Scene 005",
      "stateless": true,
      "commandClassVersion": 3,
      "min": 0,
      "max": 255,
      "list": false,
      "lastUpdate": 1689039910040
    },

I am not sure where these states come from, but searching the zwave-js source, I suspect this is supplied from the device’s firmware? If yes, is it possible to add the value states on the aux switch scenes too?

Thanks!